nce. This video shows how two builders put in an epoxy floor for a garage.

Pour water onto the floor to first remove the oil and grease that may have been created by the car. The grease and oil will result in problems with the installation at the start and must to be addressed right away. Make use of a degreaser as well as an exfoliator to determine the areas that are greased.

Once the floor is cleaned, the contractors get to work acid-etching it. Safety equipment like gloves and boots made of rubber as well as eye protection and rubber gloves are necessary for this process. To provide the epoxy with a clean slate to adhere to, acid can be used.

The epoxy solution gets mixed after the acid is washed and vacuumed away. You don’t want to mix more than what you’ll require within the next 2 hours, as the epoxy is going to be set once it has been awaited.

The epoxy is allowed to cure overnight. Then in the morning, you will be able to check whether a new coat is required. For more details look up the hyperlink in the above link.

wh9vthyj1x.